0x0E = NetSDR Boot mode Idle
0x0F = NetSDR Boot mode busy programming
0x20 = NetSDR A/D overload occurred
0x80 = NetSDR Boot mode programming error
Example, host request status:
[04][20] [05][00]
The idle Target responds with
[05][00] [05][00] [0B]
If an A/D overload occurs, the NetSDR will send an unsolicited status message back to the host.
[05][20] [05] [00] [20]
4.1.6 Product ID
Purpose: Returns the 4 byte product ID for the NetSDR used in firmware update validation.
Control Item Code: 0x0009
Control Item Parameter Format:
A read only value returned identifying the NetSDR.
Example, host request product ID:
[04][20] [09][00]
The Target responds with
[08][00] [09][00] [53][44][52][04]
4.1.7 Options
Purpose: Returns information on installed options for the NetSDR.
Control Item Code: 0x000A
Control Item Parameter Format:
The first parameter is 1 byte option data with the following bit definitions:
Bit 0 1==Sound Enabled
Bit 1 1==Reflock board Present
Bit 2 1==Down Converter board Present
Bit 3 1==Up Converter board Present
Bit 4 1==X2 board Present
Bits 5-7 not defined
The second parameter is 1 byte custom option data with the following definitions:
Bits 0-7 custom options not currently defined
The third parameter is 4 bytes of option detail data with the following 4 bit field definitions:
Bits 0-3 Main board Variants(value is 0 to 15) TBD
Bits 4-7 Reflock board Variants(value is 0 to 15) TBD
Bits 8-15 Down Converter board Variants(value is 0 to 15) TBD
Bits 16-23 Up Converter board Variants(value is 0 to 15) TBD
Bits 24-31 Not defined
Read only values specifying what options are available in the NetSDR.
Example, host request Options:
[04][20] [0A][00]
The Target may respond with this if only has a reflock board installed and sound enabled
[08][00] [0A][00] [03] [00] [00][00][00][00]
Rev. 1.03 2011-11-01
14
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais